Monnit Wireless-Voltage-Detection-50-VDC

DC-Voltage-Sensor

Product Description

The Monnit Voltage Detector – 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as “Voltage Detected” or “No Voltage”.

Product Features

  • Interfaces with other devices or power lines up to 50 volts DC.
  • Max sensor input voltage up to 50 volts DC.

Voltage Detection Sensor Specifications

Maximum Rated Input Voltage Up to 50 Volts DC
Minimum Rated Input Voltage -50.0 Volts
Voltage Detection Threshold Present above ~.47 Volt, Absent below ~.47 Volt
Trigger Transmits Data on State Change
Open Circuit Reading Voltage Absent

Coin Cell Specifications

Battery Type Replaceable 3.0V Coin Cell Battery
Dimension 1.775 in x 1.04 in x 0.785 in
Max Operating Temperature -20°C to +60°C (-4° to +140°F)
Optimal Battery Operating Temperature (Coin Cell) +10°C to +50°C (+50°F to +122°F)
Supply Voltage 2.0 – 3.6 V (Single CR2032 Coin Cell Battery)
Device Range 250 – 300 ft. non-line-of-sight device range*
Battery Life At 1 hour heartbeat setting, coin cell battery will typically last ~ 1-2 Years. **
Enclosure Technology Monnit PinchPower™ Wireless Sensor Enclosures
Enclosure Material ABS

900 MHz Specifications

Operating Frequency 900 MHz Operating Frequency
Certifications Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-RFSC1)
Complies with Industry Canada standards. (IC: 9794A-RFSC1)

Specifications Image